Category

Accumulator Head Blow Moulding Machines–Air Duct

Mono Layer and Multi-layer Accumulator Head Type Blow Molding Machine. For producing 20 liter to 1000 liter volume, all kinds of jerry can, containers, air duct and industrial low molding products.

PET STRETCH BLOW MOLDING MACHINE - PREFERENTIAL HEATING FOR FLAT CONTAINERS (EX SERIES)

PET STRETCH BLOW MOLDING MACHINE - PREFERENTIAL HEATING FOR FLAT CONTAINERS (EX SERIES)

Accumulator Head Blow Moulding Machines–5 Gallons Water Tank

Accumulator Head Blow Molding Machines For 5 gallon water tank

Continuous Co-Extrusion Blow Molding Machine (Multi Layer)

This series is specified for producing particular containers that are fully sealed, light resistant, heat resistant, anti-bacterial, durable, anti-static, corrosion resistant, non-toxic…etc.

PET BLOW MOLDING MACHINE - WIDE MOUTH BOTTLE

Adopt the touch screen control system with 64K color and friendly PLC operation. Exclusively designed machine construction makes it convenient to combine the blow molding machine with conveyor system. The preforms are automatically arranged in order for feeding system at a single way and the dividing carrier is driven by a servo motor; this way will avoid preforms jamming, causing machine down or preforms waste. Adopt a servo control screw driving system; it is rapid, stable, clean and environmentally friendly. The preforms are fed into the heating system in a matrix mode and uniform heated by single-lamp with double-sided heating. Employ a single-lamp with double-side heating design and will save about 50% heating consumption compared with competitor method. With the temperature feedback function, temperature in the heating oven is automatically controlled by adjustment of infrared lamps to reduce prefrom crystallization problems. Specially designed heating box upgrade convenience of maintenance in changing infrared lamp and cooling ramp. The clamping mechanism is driven by a combination of servo motor and cam; this results in accurate and stable motion, low noise and minimal pollution. Utilizes the air recovery system and efficiency up to 50% so that the low-pressure air compressor will not be required. This will save equipment investment costs and energy consumption by up to 15%.

Roll-On Ball / Hollow Ball Making Machine

Accumulator Head Blow Moulding Machines–400L-600L Fuel Tank

Accumulator Head Blow Moulding Machines For 400L-600L fuel tank

PET Stretch Blow Molding Machine for up to 600ml Bottles

This is a new generation of fully automatic and versatile machine for mass production of PET bottles with volumes up to approximately 200 ~ 1500ml. Ideally suitable for large scale factories and for applications where stringent quality requirements have to be met. Substantial reduction in operating cost is achieved by saving of manpower.

PET Fully Electric Stretch Blow Molding Machine

PET Fully Electricity Stretch Blow Molding Machine for Jar and Large Containers

Fully Electric Extrusion Blow Molding Machine - Dual Diehead & Single Station

Full electric movement, energy saving 15%~40%.

Intelligent All-Electric Blow Moulding Machine

Intelligent All-Electric Blow Molding Machine for 20 liter jerry can

PET Stretch Blow Molding Machine for Wide Mouth / Large Containers

This is a new generation of fully automatic and versatile machine for mass production of PET large volume bottles, oval bottles, flat bottles and jars with volumes up to approximately 6000ml. Ideally suitable for large scale factories and for applications where stringent quality requirements have to be met. Suitable for clean lotion, edible oil, detergent, pickle food, etc. Small & Medium Volume Bottles

Co-Extrusion 3 Layer, Double Station Blow Moulding Machine

Co-Extrusion 3 Layer, Double Station Blow Molding Machine CO-EXTRUSION 3 LAYER, DOUBLE STATION L-ring drum open top drum

Double Layer Accumulator Head Blow Moulding Machines

Double Layer Accumulator Head Blow Molding Machines

PET Stretch Blow Molding Machine for up to 1500ml Bottles

This is a new generation of fully automatic and versatile machine for mass production of PET bottles with volumes up to approximately 200 ~ 1500ml. Ideally suitable for large scale factories and for applications where stringent quality requirements have to be met. Substantial reduction in operating cost is achieved by saving of manpower.

5 Gallon Bottles PET Fully Electric Stretch Blow Molding Machine

CMSQ1 PET all electric stretch blow molding machines are suited for 3 gallon to 5 gallon water bottles.

Accumulator Head Blow Moulding Machines-L Ring Drum

FKI offers the most practical Accumulator Head Blow Molding Machine for the industry with a wide range of applications: Cooking oil containers: from 10 to 30 liters Chemical use jerry cans: from 10 to 60 liters Open top drums: from 30 to 220 liters Closed head L Ring drums: from 120 ~ 220 liter, 1,000 liter IBC, air ducts, automobile components, tables, tools boxed, water vessels, furniture board and any other hollow-shaped articles as per requirements.

PET Fully Electric Stretch Blow Molding Machine for Bottles / Containers with Handle

2-Layer Co-Extrusion Blow Moulding Machine

2-Layer Co-Extrusion Blow Molding Machine

Pneumatic Extrusion Blow Molding Machine

Continuous Extrusion Blow Molding Machine-Single Station

Energy Saving. Using one hybrid servo motor to control all machine actions. Power consumption is less than a general hydraulic machine by 20~45%, easy to reach energy saving and carbon reduction goals. Servo Hydraulic and Electric Power System: Accords actual operation condition to carry on the automatic velocity modulation, reduces the energy loss of auxiliary construction section greatly, and tallies with recent modern energy conserving and environmental protection. Reduces the system response time, and reaches the quality requirement of high accuracy products.

Accumulator Head Blow Moulding Machines-Water Pressure Tank

Mono Layer and Multi-layer Accumulator Head Type Blow Molding Machine. For producing 20 liter to 1000 liter volume, all kinds of water pressure tank, jerry can, containers, air duct and industrial low molding products.

PET STRETCH BLOW MOLDING MACHINE - THE WORLD'S MOST ENERGY EFFICIENT BOTTLE PRODUCTION LINE (EM STANDARD SERIES)

(Output 5,300 ~ 12,000B.P.H / Volume up to 2L)

4-Layer Co-extrusion Blow Moulding Machine

4-Layer Co-Extrusion Blow Molding Machine for 1L Bottle Double-head, Double-station

Accumulator Head Blow Moulding Machines-40 Liter Float

Accumulator Head Blow Molding Machines-40 Liter Float

Single-Layer Blow Moulding Machine

Single-Layer Blow Molding Machine Six-head, Double-station For 200ml/300ml bottle