• MENU
  • CATEGORIES

    Category

    High Speed Injection Molding Machine (TSV Series)

    High Speed Injection Molding Machine (TSV Series)

    Category : Automatic Injection Molding Machine

    • The double hydraulic cylinder provides secure hold on pressurefor the injection carriage eliminating nozzle leakage. • The toggles are lubricated with the graphite bronze bushes to ensure lower friction wear, assure greater accuracy and greatlyextended life of the clamp unit. • Fast clamping system equipped with regeneration circuit increase speed by 60% to shorten cycle time and save energy. • Bosch proportional valves are equipped with LVDT positional feedback and pressure transducer. The speed of the proportion-al valves is more precise resulting in more accurate control.

    Dual Platen Injection Molding Machine

    Dual Platen Injection Molding Machine

    Category : Injection Molding Machines by Platen

    • Saves up to 20% of the machine floor space. (foot print) • Automatic mould adjustment saves on mould-changing time. • Clamping cylinder builds up high pressure rapidly by using split nut lockup. • Short stroke clamping cylinders prolong oil seal life. • Wide tie bar spacing and mould opening stroke, ideal for the pro-duction of any products either wide or deep draw. • Four balanced clamping cylinders ensure long lasting tie bar perfor-mance.

    Large Plastic Injection Molding Machine - T-XXL Series

    Large Plastic Injection Molding Machine - T-XXL Series

    Category : Automatic Injection Molding Machine

    The CLF Intelligent Machine, Extra Large and Extra Strong for Extra Performance...

    In Mold Label (IML Label)

    In Mold Label (IML Label)

    Category : Injection Molding Machines

    In-Mold label (IML) is widely used in food container because the ink is between two layers of film and normally produce in dust-free fab or air conditioning clean room to minimize the human touch. Using IML can do the injection and labeling the product at the time. So it is suitable for mass production and standardization.

    Hydraulic Molding Machine JD-H2 Series

    Hydraulic Molding Machine JD-H2 Series

    Category : Injection Molding Machines

    This series of machines is suitable for molding many different plastic related materials. Such as rubber, melon dishes, bakelite, urea powder, foaming, brakes, etc.

    In mold labeling cosmetic injection mold

    In mold labeling cosmetic injection mold

    Category : Injection Molding Machines

    Mold size: cover-410 x 400 x 380 mm Mold weight: 450kg Injection machine: 260Ton Surface: In mold label

    Heavy Duty Double Toggle Injection Molding Machine

    Heavy Duty Double Toggle Injection Molding Machine

    Category : Toggle Clamping Injection Molding Machines

    The new design has ensured maximum space between tie bars, as well as a large daylight area. The fixed and moving platens are designed in such a way that the yensure complete accuracy and precision. The injection carriage uses a balanced double hydraulic cylinder to provide a secure hold between the mould and the nozzle to eliminate nozzle leakage. Linear guide ways reduce mechanical friction, decrease machine wear and increases accuracy over back pressure providing better control of the injection sequence. Bosch proportional valves are equipped with LVDT positional feedback and pressure transducer. The speed of the proportional valves is more precise resulting in more accurate control.

    Outward Toggle Type Plastic Injection Molding Machine - TWII-Series

    Outward Toggle Type Plastic Injection Molding Machine - TWII-Series

    Category : Automatic Injection Molding Machine

    Outward Toggle Clamping a Significant Increase in Structural Accuracy of Mold Platen Benefit: High Rigidity / Highly Precise Injection, Energy Saving / Customization Plasticized Applications: Preform Bottle Cap, Paint Bucket

    YC Vertical Clamping Horizontal Injection Tie-barless Series

    YC Vertical Clamping Horizontal Injection Tie-barless Series

    Category : Vertical Injection Molding Machines

    Vertical clamping, without machine column design, the mechanical constitutive property is strong, Injection powerfully, suit large-scale embedment to take shape the processing.

    Dual Color Injection Molding Machine (DCV Series)

    Dual Color Injection Molding Machine (DCV Series)

    Category : Automatic Injection Molding Machine

    • Effectively eliminating rotary inertia, adopting mechanical design for orientation and orienting turntable table by to-and-fro rotary. • With alternative rotary methods, machine is dual-purpose by operating with turntable table and spindle alternatively. Keeping a highly precision level in operation by adjusting turntable table with the accordance of its mold weight, to protect guide pins and ensure precision clamping orientation. • Effectively keeping a precision balance on mold to avoid table leaning forward, hold the mold stable without damaging guide pins.

    PET Preform Series Injection Molding Machine - PET Series

    PET Preform Series Injection Molding Machine - PET Series

    Category : Preform Injection Molding Machines

    CHUAN LIH FA offers a full series of plastic injection molding machines for big, medium and small mouth PET preform production...

    Hydraulic Clamping Injection Molding Machine (HCV Series)

    Hydraulic Clamping Injection Molding Machine (HCV Series)

    Category : Automatic Injection Molding Machine

    • New hydraulic clamping mechanism is with integration high pressure cylinder and prefill valve at top end which is to raise up the locking pressure much faster , also fast speed for mold closing and opening . Whilst , solid mechanical design provides much stronger rigidity of mold platen and ensure the high accuracy of molding products . • Linear transducers for Clamping , Ejection and Injection strokes , accurate and easy in operation . • Adopted the high efficient Japan made servo system ( DAIKIN SUT SYSTEM) which is with pressure transducer to detect and feedback , also the encoder behind motor will calculate and provide accurate oil flow to achieve CLOSE LOOP control . SUT system can provide excellent response time ≦ 0.07sec , repeatability ≦ 1% and linearity ≦ 1% . • With diagonal dual carriage cylinders to enforce the nozzle holding force . Liner rails with ball bearings supports whole injection unit to reduce the mechanical resistant and accurate the injection control. • Digital type back pressure control. • Ion nitrided screw and barrel sets are with long working life .

    Two Platen Plastic Injection Molding Machine - TP Series

    Two Platen Plastic Injection Molding Machine - TP Series

    Category : Injection Molding Machines by Platen

    Unique two platen design for clamping mechanism exhibits exceptionally high speed clamping feature.

    Plastic Injection Molding Machine - TX Series

    Plastic Injection Molding Machine - TX Series

    Category : Automatic Injection Molding Machine

    A performance-proven plastic injection molding machine with a faster injection speed

    PET Preform Injection Molding Machine

    PET Preform Injection Molding Machine

    Category : Preform Injection Molding Machines

    Professional PET injection molding machine. Whole plant export includes know-how Special use extrusive screw. High mixes for PET plasticity. Digital control system uses 4 CPU computer systems. Heat treated stainless steel molds for a long service life - guaranteed 2 million times. Japan SEIKI hot runner, air valve, and auto temperature control. Double circuit negative pressure chiller. Technical consulting service is available by request.

    All Electric Plastic Injection Molding Machine - AE Series

    All Electric Plastic Injection Molding Machine - AE Series

    Category : Automatic Injection Molding Machine

    Based on years of OEM/ODM cooperation experience with a renowned Japanese company, CLF has accumulated extensive expertise in this field of technology...

    EJ_Series

    EJ_Series

    Category : Automatic Injection Molding Machine

    It controlled by 4 high end servo drives. Enhanced structural stability brings lifespan prolongation. Simple mechanical design is easier to maintain. It could reduce energy consumption as least 50% and up to 80% to provide you with real competitive edge. The high cost-effectiveness makes much easier to cross the threshold of clean room environment! B&R APROL process control system.

    Plastic Machine Control System

    Plastic Machine Control System

    Category : Injection Molding Machines

    In the field of injection molding machine in China, the sales volume of...

    Hydraulic Molding Machine - JD-H Series

    Hydraulic Molding Machine - JD-H Series

    Category : Injection Molding Machines

    This series of machines is suitable for molding many different plastic related materials. Such as rubber, melon dishes, bakelite, urea powder, foaming, brakes, etc.

    Double Toggle Injection Molding Machine (SMV Series)

    Double Toggle Injection Molding Machine (SMV Series)

    Category : Toggle Clamping Injection Molding Machines

    • Double cylinder design reduces injection unit distance. • Ion nitrided essential components-barrel,screw etc. ensure lasting life. • Easy-adjustable and reliable Multi steps injection pressure and speedcontrol. • Steel bushes have a hardness of HV800 for wear resistances. • Auto-lubrication system is provided to assure the constant lubrication of the toggle mechanism • Multi-stroke hydraulic ejector ensures positive ejection of the product and enables unmanned production with or without the use of a robotic arm. • Differential hydraulic circuit shortens cycle time and saves energy. • Low pressure mold protection system was used to avoid mold damage or excessive wear.

    Dynisco 1490 – 5 Digit 1/8 DIN Panel Indicator

    Dynisco 1490 – 5 Digit 1/8 DIN Panel Indicator

    Category : Injection Molding Machines

    • Universal input • 2 alarm outputs • Retransmission • Min/max valuehold • Modbus communications • Transmitter power supply

    XIANG IN ENTERPRISE CO., LTD.

    XIANG IN ENTERPRISE CO., LTD.

    Company Profile :

    Xiang In Enterprise Co., Ltd was founded in 1997, and has been dedicated to manufacturing and developing of Heat Transfer Film,In Mold Labeling, and Heat Transfer Film Printing Machine. The aim of our company is to assist the clients and to develo...

    TECHMATION CO., LTD.

    TECHMATION CO., LTD.

    Company Profile :

    Techmation started in Taiwan in 1984, registered in Ningbo in 2001, completed the shareholding system transformation in 2011, and listed in A-shares in March 2015 (stock code: 603015). Headquartered in Ningbo, a long-established port city, Ning...

    CHUAN LIH FA MACHINERY WORKS CO., LTD.

    CHUAN LIH FA MACHINERY WORKS CO., LTD.

    Company Profile :

    Chuan Lih Fa (CLF) Machinery Works Co. Ltd was founded in 1966, and after half-a-century, it has evolved from a local factory to an international brand in plastic injection machinery. Starting from small size plastic injection molding machines, th...

    YUH DAK MACHINERY CO., LTD.

    YUH DAK MACHINERY CO., LTD.

    Company Profile :

    YUH-DAK Machinery Co., Ltd. is a manufacturer specializing in making vertical plastic injection molding machines. The company was established in April 1986. Since then, with thirty years of rich experience in manufacturing and keen observation ...

    ASIAN PLASTIC MACHINERY CO., LTD.

    ASIAN PLASTIC MACHINERY CO., LTD.

    Company Profile :

    Chen Hsong Machinery Taiwan(Asian Plastic Machinery) was established during 1980, organized by a group of professional, diligent, and technical skillfully staffs. Based on the need of the product diversification and the customer’s design in rec...

    CHIA MING MACHINERY CO., LTD.

    CHIA MING MACHINERY CO., LTD.

    Company Profile :

    CHIA MING MACHINERY CO., LTD is the leading manufacturer of blow molding machinery in Taiwan. We are completely committed to producing the highest quality blow molding machinery and making sure our customers know that they come first. Rese...

    MITSUDELL CO., LTD. - Dynisco/Viatran Agent in Taiwan

    MITSUDELL CO., LTD. - Dynisco/Viatran Agent in Taiwan

    Company Profile :

    Dynisco Polymer manufacturers need to create new materials and deliver high quality to meet ever changing end-use requirements. Precise testing and analysis is mandatory to ensure quality and to stay competitive. Rely on Dynisco�...

    JING DAY MACHINERY INDUSTRIAL CO., LTD.

    JING DAY MACHINERY INDUSTRIAL CO., LTD.

    Company Profile :

    PROVIDING HIGH QUALITY RUBBER AND SILICONE MOLDING MACHINE FOR YOUR SPECIFIC NEED Jing Day Machinery Industrial Co., Ltd. is a supplier of total rubber and silicon molding machine and related solutions for our global c...

    JIA THAI INDUSTRIAL CO.,LTD.

    JIA THAI INDUSTRIAL CO.,LTD.

    Company Profile :

    Founded in 1990, Jia Thai Industrial Co., Ltd. has been engaged in mold manufacturing for over 30 years. Our professional engineers are all dedicated with dedication, integrity and strictest discipline in providing the impeccable service in sat...

    KING'S SOLUTION CORP.

    KING'S SOLUTION CORP.

    Company Profile :

    Since 1983, KING'S SOLUTION CORP. has manufactured various injection molding, machine with tooling and automation system to meets different customers' needs. We commit ourselves to a professional group with excellent plasticity, based on...

    EDEX TECHNOLOGY CO., LTD.

    EDEX TECHNOLOGY CO., LTD.

    Company Profile :

    Edex technology co., Ltd. was established in 2009, with minimal style and extreme deduction as the key design principles and keeps providing our clients with the most competitive injection molding machine by “Precision, Innovation, Energy-sa...

    LIEN CHINY ENTERPRISE CO., LTD.

    LIEN CHINY ENTERPRISE CO., LTD.

    Company Profile :

    Founded in 1990, Lien Chiny Enterprise Co., Ltd. is a professional company that offers all kinds of plastic machineries, molds and relatives auxiliaries.  Our major products include plastic blow molding machines, injection mold...

    DAH BAH MACHINERY INDUSTRIAL INC.

    DAH BAH MACHINERY INDUSTRIAL INC.

    Company Profile :

    Founded in 1964, Dah Bah Machinery Industrial Inc. is the professional manufacturer and supplier of high-quality Bag Making Machine, Cutting / Sheeting Machine, Embossing Machine, Roll Rewinding / Inspecting Machine, PVC Shrinkable Label Making Ma...

    C.T.M.CO.,LTD.

    C.T.M.CO.,LTD.

    Company Profile :

    Our Believe C.T.M. was founded in 2005. We are one of Taiwan's leading manufacturers in the field of hydraulic midsole and outsole machinery.  We specifically emphasise R&D, and in a way good service sells our products. ...

    123