• MENU
  • CATEGORIES
    Injection Molding Machine Auxiliary Solutions

    Injection Molding Machine Auxiliary Solutions

    Category : Mold Temperature Controllers

    ‧ Lower cost ‧ Greater productivity ‧ Better energy efficiency ‧ Better company image ‧ Better working environment ‧ Less material waste and pollution during the conveying process ‧ Less noise due to the separation of the blowers from the working place

    TEMPERATURE CONTROLLERS

    TEMPERATURE CONTROLLERS

    Category : Mold Temperature Controllers

    From single parts to complete systems, Always Reliable

    Temperature Controller

    Temperature Controller

    Category : Mold Temperature Controllers

    ARICO - The Best Solution Of Temperature Controller ARICO Technology and worldwide's rubber and plastic injection industry manufacturers have cultivated a long and stable co-operation relationship between us for many years. We was founded in 1987, base on sophisticated manufacturing technology, and focus on the research and development and innovation of industrial control instrument technology. We are not only good at producing customized precision Temperature Controller and related application equipment, but also provides high-quality Temperature Controller with the most convenient setting mechanism, stable quality, at a reasonable price to manufacturers in Taiwan, China, the United States, India, Argentina, Israel, Mexico, Thailand, Malaysia, Southeast Asia and other countries. In addition to accumulating and stabilizing partners for related instruments with Temperature Controller, ARICO continues to conduct research and development in order to provide more stable and efficient machine stability, just for achieving a higher efficiency and stable instrument technology level on temperature control, displacement sensing, pressure sensing, injection molding machine IoT on rubber and plastic industry.

    Mold Temperature Controller (YBMI/YBMD)

    Mold Temperature Controller (YBMI/YBMD)

    Category : Mold Temperature Controllers

    Mold Temperature Controller (YBMI/YBMD) Steady controlled temperature makes plastic molding accurate in size and consistent with quality. Accurate mold temperature solves the problem of plastic flow patterns, reducing flow and weld lines, gloss appearance, record grooves effect, silver streaking, stress-whitening, warping, and etc.... P.I.D temperature controllers are used for accurate control of temperature within±1℃. Two-step-heating selector makes rapid temperature increasing possible when require thus saving time and power specially start up in the morning. Patented “Heat-insulated” design improves your safety, extend the machine’s lifetime and make maintenance more efficiently. YBMI : By oil, suit for long-term continuous operation, keep the temperature steady, no flash on tiny and thin products, and no corrosion. However, the heater may be damaged if you do not use the thermo oil correctly or change oil routinely. Recommend to choose oil-type mold temperature controller when your required temperature is 150℃ or above. YBMD : By water, heating up faster, cooling better, harmless to your mold and more economic than oil type for maintenance and cost. However, the water boiling point is low and the element of different water may occur corrosion or limescale to affect the heat exchange and products quality. Recommend to choose water-type mold temperature controller when your required temperature is 150℃ or below.

    Temperature Controlle and Timing Controller

    Temperature Controlle and Timing Controller

    Category : Mold Temperature Controllers

    Temperature controller, being used in hot runner system, is a device which keeps maintaining the required temperature value for the hot runner system. It consists of temperature control card,circuit breaker, cabinet, fan, terminal blocks and cables. The temperature control card in the cabinet controls the temperature of the hot runner product and the temperature accuracy of system. Self-protection and fault tolerance depends on the function of the temperature control card. At present, temperature controller is necesscry in the application of hot runner molds.

    Mold Temperature Controller (YBMI/YBMD)

    Mold Temperature Controller (YBMI/YBMD)

    Category : Mold Temperature Controllers

    Mold Temperature Controller (YBMI/YBMD) Steady controlled temperature makes plastic molding accurate in size and consistent with quality. Accurate mold temperature solves the problem of plastic flow patterns, reducing flow and weld lines, gloss appearance, record grooves effect, silver streaking, stress-whitening, warping, and etc.... P.I.D temperature controllers are used for accurate control of temperature within±1℃. Two-step-heating selector makes rapid temperature increasing possible when require thus saving time and power specially start up in the morning. Patented “Heat-insulated” design improves your safety, extend the machine’s lifetime and make maintenance more efficiently. YBMI : By oil, suit for long-term continuous operation, keep the temperature steady, no flash on tiny and thin products, and no corrosion. However, the heater may be damaged if you do not use the thermo oil correctly or change oil routinely. Recommend to choose oil-type mold temperature controller when your required temperature is 150℃ or above. YBMD : By water, heating up faster, cooling better, harmless to your mold and more economic than oil type for maintenance and cost. However, the water boiling point is low and the element of different water may occur corrosion or limescale to affect the heat exchange and products quality. Recommend to choose water-type mold temperature controller when your required temperature is 150℃ or below.

    Process Controller ATC990

    Process Controller ATC990

    Category : Mold Temperature Controllers

    The ATC990 with a graphical/text LCD display is a universal input process controller with advanced functionality including Trend views as well as Digital Inputs, USB and data logging options.

    Multi Mold Temperature Controller (YMWP)

    Multi Mold Temperature Controller (YMWP)

    Category : Mold Temperature Controllers

    Heat Up & Cool Down Your Mold Without Waiting! YMWP combines a chiller and a mold temperature controller to one. No need to wait or switch either your chiller or your mold temperature controller to cool down or heat up the required temperature. YMWP is different to other generic chillers or mold temperature controllers which can supply cooling water and hot water for your mold at the same time in steady and good condition. Save your energy cost and space. Cool down quickly from 35°C to 10°C in minutes. Use the latest European, American or Japanese compressor and pump. High-efficient transmission function can save up to 25% energy. Excellent stability. Save time to preheat or cool down your mold’s temperature degree. Completed safety protection to lengthen the operating time. Save space and cost. Supply cooling water and hot water (max 180°C) at the same time by the 2-in-1 design.

    Extrusion Molding Machine Auxiliary Solutions

    Extrusion Molding Machine Auxiliary Solutions

    Category : Mold Temperature Controllers

    ‧ Lower cost ‧ Greater productivity ‧ Better energy efficiency ‧ Better company image ‧ Better working environment ‧ Less material waste and pollution during the conveying process ‧ Less noise due to the separation of the blowers from the working place

    Hot Runner Controller / Multi-Cavity Hot Runner Temperature Controller - TC5200

    Hot Runner Controller / Multi-Cavity Hot Runner Temperature Controller - TC5200

    Category : Mold Temperature Controllers

    The TC5200 multi-cavity hot runner temperature controller. One single temperature controller has 26 to 72 zones and even up to 240 zones in a network. Maintenance operations can be simplified with its modularized device design and requirement-based configuration. The purchasing costs are greatly reduced by its unique temperature control, with two zones within one level. High light of the TC5200 Hot Runner Control system is the GUI based user interface, along with its adjustable perspective angle, is easy for fast adoption in multi-points control. The RS485 communication function enables you to set up multiple controls at once to simplify the required operations. The built-in and practical current sensor and indicator functions benefit various applications, especially automotive, bottle billet injection, and medical supplies, by realizing the concept of one-stop control. Arico

    Constant Water Chiller (YCWP)

    Constant Water Chiller (YCWP)

    Category : Mold Temperature Controllers

    Different to traditional water chillers with unstable temperature degree and unreliable compressor troubles, YCWP as a high-quality water chiller can be set by your required degree precisely and keep it steadily. The advantages ensure your product in high quality and improve process capability. Also save more power energy for you! Mold’s cooling temperature controlling setting within ±1 ℃ to ensure high-quality products and increase high performance. By unique constant design, YCWP save more energy and extend machine life. Equipped with high-efficiency condenser able to work in high heat conduction and reduce 35% of unit size for space save. Use imported well-known compressor. Large models adopt dual compressors with dual cooling system that work independently. When one breaks down, the system will keep working and keeps production line smoothly. Use P.I.D. temperature controller, error Indicators, digital display controller and more safety protection devices. User-friendly setting and smart error report for your productive more efficient.

    Compact Water-type Mold Temperature Controller

    Compact Water-type Mold Temperature Controller

    Category : Mold Temperature Controllers

    Size decrease 50%!You can place the unit under the molding machine or small place by your need easily. All functions are the same but become smaller and lighter! You can place the unit on floor or on a working platform for better working environment. Patented “Heat-insulated” design (China Pat. 01345946.5; Taiwan Pat. 569920) improves your safety, extend the machine’s lifetime and make maintenance more efficiently. By water, heat up and cool down faster. Also harmless to your mold and more economic than oil type for cost. Imported PID temperature controllers are used for accurate control of temperature within ±1˚C. Use imported pump for less maintenance and better durability.

    High Degree Water-type Mold Temperature Controller

    High Degree Water-type Mold Temperature Controller

    Category : Mold Temperature Controllers

    Economic and advanced design for high degree is your new choice. Water-type mold temperature controller (High Degree) do not pollute environment with oil gas that is the best choice for electronics, medical and cosmetic packing industries where strictly require better working environment. When oil-type model cannot satisfy for your need, you should change to water compression one. By direct supply method, it will not transform to steam even the temperature up to 160℃. Heat up faster, long machine life, high stability, precise control within ±0.3℃, and energy save for you. Precise temperature control and high stability control by 0.1℃ as a unit to display. The inaccuracy rate below ±0.3℃. Perfect for any precise requirement such as electronics industry. Heat-insulated design extend operating lifetime. PID temperature controller. Excellent overheat security protecting device. SSR relay control for durability. Unique design to prevent water leakage and pollution when mold is changed.

    Film Extrusion Molding Machine Auxiliary  Solutions

    Film Extrusion Molding Machine Auxiliary Solutions

    Category : Mold Temperature Controllers

    ‧ Lower cost ‧ Greater productivity ‧ Better energy efficiency ‧ Better company image ‧ Better working environment ‧ Less material waste and pollution during the conveying process ‧ Less noise due to the separation of the blowers from the working place

    Mold Temperature Controller (YBMI/YBMD)

    Mold Temperature Controller (YBMI/YBMD)

    Category : Mold Temperature Controllers

    Mold Temperature Controller (YBMI/YBMD) Steady controlled temperature makes plastic molding accurate in size and consistent with quality. Accurate mold temperature solves the problem of plastic flow patterns, reducing flow and weld lines, gloss appearance, record grooves effect, silver streaking, stress-whitening, warping, and etc.... P.I.D temperature controllers are used for accurate control of temperature within±1℃. Two-step-heating selector makes rapid temperature increasing possible when require thus saving time and power specially start up in the morning. Patented “Heat-insulated” design improves your safety, extend the machine’s lifetime and make maintenance more efficiently. YBMI : By oil, suit for long-term continuous operation, keep the temperature steady, no flash on tiny and thin products, and no corrosion. However, the heater may be damaged if you do not use the thermo oil correctly or change oil routinely. Recommend to choose oil-type mold temperature controller when your required temperature is 150℃ or above. YBMD : By water, heating up faster, cooling better, harmless to your mold and more economic than oil type for maintenance and cost. However, the water boiling point is low and the element of different water may occur corrosion or limescale to affect the heat exchange and products quality. Recommend to choose water-type mold temperature controller when your required temperature is 150℃ or below.

    Mold Temperature Controller (YBMI/YBMD)

    Mold Temperature Controller (YBMI/YBMD)

    Category : Mold Temperature Controllers

    Steady controlled temperature makes plastic molding accurate in size and consistent with quality. Accurate mold temperature solves the problem of plastic flow patterns, reducing flow and weld lines, gloss appearance, record grooves effect, silver streaking, stress-whitening, warping, and etc.... P.I.D temperature controllers are used for accurate control of temperature within±1℃. Two-step-heating selector makes rapid temperature increasing possible when require thus saving time and power specially start up in the morning. Patented “Heat-insulated” design improves your safety, extend the machine’s lifetime and make maintenance more efficiently. YBMI : By oil, suit for long-term continuous operation, keep the temperature steady, no flash on tiny and thin products, and no corrosion. However, the heater may be damaged if you do not use the thermo oil correctly or change oil routinely. Recommend to choose oil-type mold temperature controller when your required temperature is 150℃ or above. YBMD : By water, heating up faster, cooling better, harmless to your mold and more economic than oil type for maintenance and cost. However, the water boiling point is low and the element of different water may occur corrosion or limescale to affect the heat exchange and products quality. Recommend to choose water-type mold temperature controller when your required temperature is 150℃ or below.

    Dual-Control Mold Temperature Controller

    Dual-Control Mold Temperature Controller

    Category : Mold Temperature Controllers

    One unit can control two different temperature for male and female mold’s need simultaneously. Keep your products in better quality and save your space and cost. Size decrease 40% to save your space. No need to change machines often can save your cost and time for higher efficiency. Patented “Heat-insulated” design (China Pat. 01345946.5; Taiwan Pat. 569920) improves your safety, extend the machine’s lifetime and make maintenance more efficiently. Imported P.I.D. temperature controllers are used for accurate control of temperature within ±0.1˚C.

    Micro Processor Controllers

    Micro Processor Controllers

    Category : Mold Temperature Controllers

    ARICO - The Best Solution Of Micro Processor Controllers ARICO Technology and worldwide's rubber and plastic injection industry manufacturers have cultivated a long and stable co-operation relationship between us for many years. We was founded in 1987, base on sophisticated manufacturing technology, and focus on the research and development and innovation of industrial control instrument technology. We are not only good at producing customized precision Micro Processor Controllers and related application equipment, but also provides high-quality Micro Processor Controllers with the most convenient setting mechanism, stable quality, at a reasonable price to manufacturers in Taiwan, China, the United States, India, Argentina, Israel, Mexico, Thailand, Malaysia, Southeast Asia and other countries. In addition to accumulating and stabilizing partners for related instruments with Micro Processor Controllers, ARICO continues to conduct research and development in order to provide more stable and efficient machine stability, just for achieving a higher efficiency and stable instrument technology level on temperature control, displacement sensing, pressure sensing, injection molding machine IoT on rubber and plastic industry.

    Oil Heaters STM

    Oil Heaters STM

    Category : Mold Temperature Controllers

    STM series oil heaters have both the standard and high temperature models, which are used to heat up the mould and maintain temperature, although they can be used in other similar applications. High temperature oil from the mould is returned to the cooling tank and cooled by indirect cooling. It is then pressurised by the high-pressure pump, sent to the heating tank and finally to the mould with a constant temperature. With our optimised design, It can reach a maximum of 200℃ and the HANYOUNG temperature controller can maintain an accuracy of ±1℃.

    Hot Runner Temperature Controller Chassis Series - TC5E

    Hot Runner Temperature Controller Chassis Series - TC5E

    Category : Mold Temperature Controllers

    High-grade aluminum frame design Stackable design, installation space saved The steel handle for move easily Built-in NFB switch Fan built-in for heat sink Euro type multi-pole connector apply, the quality stable Terminal and wire crimped by auto machine, the quality stable Universal standardized chassis for any brand of module Arico

    Hot Runner Temperature Controller Chassis Seriess - TC5H Series

    Hot Runner Temperature Controller Chassis Seriess - TC5H Series

    Category : Mold Temperature Controllers

    Simple designs Stackable design, installation space saved The handle can be hidden Built-in NFB switch Fan built-in for heat sink Fast alternative for 230V/380V power input Euro type multi-pole connector apply, the quality stable Terminal and wire crimped by auto machine, the quality stable Universal standardized chassis for any brand of module. Arico

    Multi-Cavity Hot Runner Temperature Controller - TC5100

    Multi-Cavity Hot Runner Temperature Controller - TC5100

    Category : Mold Temperature Controllers

    Adjustable user perspective: 110°~145° Rack type cabinet design USB port 7” TFT SVGA LCD NAND Flash 8M +128M Module section 15A 2 zone / 30A 1 zone The module plug-in designed for maintains easily Arico

    YANN BANG ELECTRICAL MACHINERY CO., LTD.

    YANN BANG ELECTRICAL MACHINERY CO., LTD.

    Company Profile :

    YANN BANG, the specialist of automatic auxiliary conveying and drying system for plastic and rubber industry in Taiwan, is founded in 1974. To persist in R&D around four decades, we are awarded of numerous patents in Taiwan, Japan, USA, German...

    MOLDPOWER CO., LTD.

    MOLDPOWER CO., LTD.

    Company Profile :

    In 1997, Mr. Chen, Chung-Le and Mr. Chen, Ya-Mo co-founded Mold Power Co. Our core-values are honesty, quality, expertise, and a better future together. We are devoted to the design and the manufacturing of hot runner systems and originated the...

    MITSUDELL CO., LTD. - Dynisco/Viatran Agent in Taiwan

    MITSUDELL CO., LTD. - Dynisco/Viatran Agent in Taiwan

    Company Profile :

    Dynisco Polymer manufacturers need to create new materials and deliver high quality to meet ever changing end-use requirements. Precise testing and analysis is mandatory to ensure quality and to stay competitive. Rely on Dynisco�...

    SHINI PLASTICS TECHNOLOGIES, INC.

    SHINI PLASTICS TECHNOLOGIES, INC.

    Company Profile :

    Derived from Taipei, Taiwan, Shini group has gone through an extraordinary journey for more than 40 years. To date, Shini group has established six production bases and one corporate technology center globally. Specialized in manufacturing pla...

    ARICO TECHNOLOGY CO., LTD.

    ARICO TECHNOLOGY CO., LTD.

    Company Profile :

    A harmonious cooperation, a devoted business spirit, an innovative edge, a worldwide brand. The trademark of ARICO Technology Co.Ltd., consists of a white human icon , three squares and alphabets ARICO TECHNOLOGY CO., LTD.: ...